Unipolar encoding

Unipolar encoding is a line code. A positive voltage represents a binary 1, and zero volts indicates a binary 0. It is the simplest line code, directly encoding the bitstream, and is analogous to on-off keying in modulation.[1]

Its drawbacks are that it is not self-clocking and it has a significant DC component, which can be halved by using return-to-zero, where the signal returns to zero in the middle of the bit period. With a 50% duty cycle each rectangular pulse is only at a positive voltage for half of the bit period. This is ideal if one symbol is sent much more often than the other and power considerations are necessary, and also makes the signal self-clocking.

NRZ (Non-Return-to-Zero) - Traditionally, a unipolar scheme was designed as a non-return-to-zero (NRZ) scheme, in which the positive voltage defines bit 1 and the zero voltage defines bit 0. It is called NRZ because the signal does not return to zero at the middle of the bit, as instead happens in other line coding schemes, such as Manchester code. Compared with its polar counterpart, polar NRZ, this scheme applies a DC bias to the line and unnecessarily wastes power – The normalized power (power required to send 1 bit per unit line resistance) is double that for polar NRZ. For this reason, unipolar encoding is not normally used in data communications today.

An Optical Orthogonal Code (OOC) is a family of (0,1) sequences with good auto- and cross-correlation properties for unipolar environments.[2] They differ from codes developed for electrical communication which are usually bipolar. i.e. (−1,1) sequences. They are used in optical communications to enable CDMA in optical fiber transmission.[3]

See also

References

  1. ^ K., Prasad, K. V. K. (2004). Principles of digital communication systems and computer networks. Charles River Media. ISBN 1-58450-329-7. OCLC 443732841.{{cite book}}: CS1 maint: multiple names: authors list (link)
  2. ^ Chung, Fan R.K.; Salehi, Jawad A.; Wei, Victor K. (May 1989). "Optical orthogonal codes: design, analysis and applications" (PDF). IEEE Transactions on Information Theory. 35 (3): 595–604. doi:10.1109/18.30982. Archived (PDF) from the original on 2023-12-25.
  3. ^ Maric, Svetislav V.; Hahm, Mark D.; Titlebaum, Edward L. (February 1995). "Construction and performance analysis of a new family of optical orthogonal codes for CDMA fiber-optic networks". IEEE Transactions on Communications. 43 (2/3/4): 485–489. doi:10.1109/26.380066. ISSN 0090-6778.

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.