This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Socket 754" – news · newspapers · books · scholar · JSTOR (August 2015) (Learn how and when to remove this message)

Socket 754

Release date	2003-06
Type	PGA-ZIF
Chip form factors	OPGA
Contacts	754
FSB frequency	200 MHz System clock 800 MHz HyperTransport
Voltage range	0.8 - 1.55 V
Processor dimensions	40 mm × 40 mm 1,600 mm²
Processors	AMD Athlon 64 (2800+ - 3700+) AMD Sempron (2500+ - 3400+) AMD Turion 64 (ML and MT) AMD Mobile Athlon 64 (2800+ - 4000+)
Predecessor	Socket A
Successor	Socket 939 (desktops) Socket S1 (laptops)
Memory support	DDR
This article is part of the CPU socket series

Socket 754 is a CPU socket originally developed by AMD to supersede its Athlon XP platform (Socket A, also referred to as Socket 462). Socket 754 was one of the first sockets developed by AMD to support their new 64-bit microprocessor family known as AMD64, this time for the consumer market.

Socket 754 was the original socket for AMD's Athlon 64 desktop processors.^[1] Due to the introduction of newer socket layouts (i.e. Socket 939 and Socket AM2), Socket 754 became the more "budget-minded" socket for use with AMD Athlon 64 or Sempron processors. It differs from Socket 939 in several areas:

• support for a single channel memory controller (64 bits wide) with a maximum of three unbuffered DIMMs, or four registered DIMMs
• no dual-core CPU support
• lower HyperTransport speed (800 MHz Bi-Directional, 16 bit data path, up and downstream)
• lower effective data bandwidth (9.6 GB/s)
• lower motherboard manufacturing costs

Although AMD promoted Socket 754 as a budget platform on the desktop and encouraged mid- and high-end users to use newer platforms, Socket 754 remained for some time as AMD's high-end solution for mobile applications (e.g. the HP zv6000 series). However in 2006, Socket S1 was released and superseded Socket 754 in the mobile CPU segment, with support for dual-core CPUs and DDR2 SDRAM.

The 2 holes for fastening the heatsink to the motherboard are placed at a distance of 90 mm.

The first processors using Socket 754 came on the market in the second half of 2003. Socket 754 was phased out in favor of Socket 939 on desktops because of low sales. The socket remained in use for laptops until it was replaced by Socket S1 in 2006.

• List of AMD microprocessors
• List of AMD Athlon 64 microprocessors
• List of AMD Sempron microprocessors

• "Socket 754 Design and Qualification Requirements (rev 3.13)" (PDF). Advanced Micro Devices. Archived from the original (PDF) on 2007-01-25. Retrieved 2010-09-23.
• AMD 754 Pin Package Functional Data Sheet