MAC-Forced Forwarding

MAC-Forced Forwarding (MACFF) is used to control unwanted broadcast traffic and host-to-host communication. This is achieved by directing network traffic from hosts located on the same subnet but at different locations to an upstream gateway device. This provides security at Layer 2 since no traffic is able to pass directly between the hosts.

MACFF is suitable for Ethernet networks where a layer 2 bridging device, known as an Ethernet Access Node (EAN), connects Access Routers to their clients. MACFF is configured on the EANs.

MACFF is described in RFC 4562, MAC-Forced Forwarding: A Method for Subscriber Separation on an Ethernet Access Network.

Allied Telesis switches implement MACFF[1] using DHCP snooping to maintain a database of the hosts that appear on each switch port. When a host tries to access the network through a switch port, DHCP snooping checks the host’s IP address against the database to ensure that the host is valid.

MACFF then uses DHCP snooping to check whether the host has a gateway Access Router. If it does, MACFF uses a form of Proxy ARP to reply to any ARP requests, giving the router's MAC address. This forces the host to send all traffic to the router, even traffic destined to a host in the same subnet as the source. The router receives the traffic and makes forwarding decisions based on a set of forwarding rules, typically a QoS policy or a set of filters.

References

  1. ^ "Using MACFF with DHCP Snooping" (PDF). Archived from the original (PDF) on 2010-11-19. Retrieved 2007-09-12.

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.