Intze principle

The Intze Principle (German: Intze-Prinzip) is a name given to two engineering principles, both named after the hydraulic engineer, Otto Intze, (1843–1904). In one case, the Intze Principle relates to a type of water tower; in the other, a type of dam.

Intze Principle for water towers

Salbke Water Tower built to the Intze Principle

A water tower built in accordance with the Intze Principle has a brick shaft on which the water tank sits. The base of the tank is fixed with a ring anchor (Ringanker) made of iron or steel, so that only vertical, not horizontal, forces are transmitted to the tower. Due to the lack of horizontal forces the tower shaft does not need to be quite as solidly built.[1] This type of design was used in Germany between 1885 and 1905.

  • Water tanks designed on the Intze Principle
  • Intze 1 tank
    Intze 1 tank
  • Intze 1 tank with inside cylinder
    Intze 1 tank with inside cylinder
  • Intze 2 tank
    Intze 2 tank

Intze Principle for dams

Intze wedge

The method of dam construction invented by Otto Intze was used in Germany at the end of the 19th and beginning of the 20th centuries. A dam built on the Intze Principle has the following features:

  • it is a gravity dam with an almost triangular cross-section
  • the wall is made of rubble stone with a high proportion of mortar
  • it has a curved ground plan
  • it has facing brickwork (Vorsatzmauerwerk or Verblendung) on the upper part of the upstream side
  • it has an earth embankment against the lower part of the upstream side, the so-called Intze Wedge (Intze-Keil)[2]
  • it has a cement-sealed upstream face, coated with a layer of bitumen or tar
  • it has internal vertical drainage using clay pipes behind the upstream face

The purpose of the Intze Wedge is to provide an additional seal in the area of the highest water pressure.[3] During the 1920s, this type of construction was gradually superseded by concrete dams or arched dams which were cheaper to build.[4]

See also

References

  1. ^ "zagermann.de - Wassertürme: Bauformen". zagermann.de. Retrieved 9 March 2015.
  2. ^ "Ruhrverband: Technische Angaben". ruhrverband.de. Retrieved 9 March 2015.
  3. ^ "Infoschrift Ruhrverband" (PDF). Archived from the original (PDF) on 2015-09-24. Retrieved 2017-11-15.
  4. ^ Talsperren nach dem Intze-Prinzip at www.kuladig.de. Retrieved 15 Nov 2017.

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.