Interfering thread nut
An interfering thread nut is a type of locknut that has an undersized root diameter. This creates an interference between the nut and the fastener, plastically deforming the threads on the fastener. Due to this deformation they are usually only used on permanent or semi-permanent installations.[1]
A variation of this nut is the tapered thread nut. It utilizes a tapered thread to achieve the interference. The nut goes on easily, because the thread diameter starts at a standard size; as the nut is further threaded on it begins to lock, much like a distorted thread locknut.[1]
References
- ^ a b Barrett, Rich, Fastener Design Manual, archived from the original on 2008-08-01, retrieved 2008-12-02.
 | This article about a mechanical engineering topic is a stub. You can help Wikipedia by adding missing information. |
Content Disclaimer
Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.
- The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
- There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
- It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
- Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
- Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.