DOSEN PROFIL LENGKAP

The International Organization for Standardization (ISO /ˈaɪsoʊ/ EYE-soh; French: Organisation internationale de normalisation; Russian: Международная...

Look up ISO, iso, or Iso in Wiktionary, the free dictionary. ISO is the International Organization for Standardization, an international standards development...

ISO 8601 is an international standard covering the worldwide exchange and communication of date and time-related data. It is maintained by the International...

ISO 4217 is a standard published by the International Organization for Standardization (ISO) that defines alpha codes and numeric codes for the representation...

ISO 3166-1 alpha-2 codes are two-letter country codes defined in ISO 3166-1, part of the ISO 3166 standard published by the International Organization...

The ISO 9000 family is a set of international standards for quality management systems. It was developed in March 1987 by the International Organization...

ISO 3166-1 (Codes for the representation of names of countries and their subdivisions – Part 1: Country code) is a standard defining codes for the names...

ISO 3166 is a standard published by the International Organization for Standardization (ISO) that defines codes for the names of countries, dependent...

ISO 3166-2 is part of the ISO 3166 standard published by the International Organization for Standardization (ISO), and defines codes for identifying the...

Organization for Standardization (ISO), with the latest standard version ratified and published by ISO in October 2024 as ISO/IEC 14882:2024 (informally known...

ISO 639-3:2007, Codes for the representation of names of languages – Part 3: Alpha-3 code for comprehensive coverage of languages, is an international...

ISO 7010 is a technical standard by the International Organization for Standardization for graphical hazard symbols on hazard and safety signs, including...

ISO 639 is a standard by the International Organization for Standardization (ISO) concerned with the representation of languages and language groups. It...

ISO 639-1:2002, Codes for the representation of names of languages—Part 1: Alpha-2 code, is the first part of the ISO 639 series of international standards...

ISO 31000 is a set of international standards for risk management. It was developed in November 2009 by International Organization for Standardization...

ISO 8583 is an international standard for financial transaction card originated interchange messaging. It is the International Organization for Standardization...

worldwide. Two supplementary standards, ISO 217 and ISO 269, define related paper sizes. All ISO 216, ISO 217 and ISO 269 paper sizes (except some envelopes)...

ISO 45001 is an international standard for occupational health and safety management systems. It was developed in March 2018 by International Organization...

Standardization (ISO) created and maintains the ISO 3166 standard – Codes for the representation of names of countries and their subdivisions. The ISO 3166 standard...

An optical disc image (or ISO image, from the ISO 9660 file system used with CD-ROM media) is a disk image that contains everything that would be written...

ISO 15118 Road vehicles -- Vehicle to grid communication interface is an international standard defining a vehicle to grid (V2G) communication interface...

ISO 15924, Codes for the representation of names of scripts, is an international standard defining codes for writing systems or scripts (a "set of graphic...

ISO 19650 is a family of international standards for information management using building information modelling (BIM) across the life cycle of built...

file? See media help. The Iso Grifo is a limited production grand tourer manufactured by Italian automobile manufacturer Iso Autoveicoli S.p.A. between...

ISO/IEC 27001 is an information security standard. It specifies the requirements for establishing, implementing, maintaining and continually improving...

Portable Document Format (PDF), standardized as ISO 32000, is a file format developed by Adobe in 1993 used to present documents, including text formatting...

ISO 26262, titled "Road vehicles – Functional safety", is an international standard for functional safety of electrical and/or electronic systems that...

The ISO week date system is effectively a leap week calendar system that is part of the ISO 8601 date and time standard issued by the International Organization...

International Organization for Standardization (ISO) and was published in 1970 as international standard ISO 2108 (any 9-digit SBN can be converted to a 10-digit...

ISO 9660 (also known as ECMA-119) is a file system for optical disc media. The file system is an international standard available from the International...

International Organization for Standardization (ISO) international standard in 1971 and published as ISO 3297 in 1975. ISO subcommittee TC 46/SC 9 is responsible...

ISO 13485 Medical devices -- Quality management systems -- Requirements for regulatory purposes is a voluntary standard, published by International Organization...

ISO 639-2:1998, Codes for the representation of names of languages — Part 2: Alpha-3 code, is the second part of the ISO 639 standard, which lists codes...

ISO 20022 is widely used in financial services. ISO 20022 is the successor to ISO 15022; originally ISO 20022 was called ISO 15022 2nd Edition. ISO 15022...

ISO 7001 ("public information symbols") is a standard published by the International Organization for Standardization that defines a set of pictograms...

The ISO metric screw thread is the most commonly used type of general-purpose screw thread worldwide. They were one of the first international standards...

ISO 3103 is a standard published by the International Organization for Standardization (commonly referred to as ISO), specifying a standardized method...

ISO 639 is a standardized nomenclature used to classify languages. Each language is assigned a two-letter (set 1) and three-letter lowercase abbreviation...

numerical scales, the most recent being the ISO system introduced in 1974. A closely related system, also known as ISO, is used to describe the relationship...

ISO 3864 is an International Organization for Standardization technical standard for safety signs and markings in workplaces and public facilities. These...

including Isothermos, Iso Autoveicoli Spa in 1952, Iso Rivolta in 1962, Iso Motors in 1973 and, in 2017, a return to ISO Rivolta. ISO Rivolta has its origins...

The ISO 14000 family is a set of international standards for environment management systems. It was developed in March 1996 by International Organization...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

to the ISO, Some existing code elements in ISO 639-2, and the corresponding code elements in ISO 639-1, are designated in those parts of ISO 639 as individual...

ISO 9362 is an international standard for Business Identifier Codes (BIC), a unique identifier for business institutions, approved by the International...

revised and replaced by ISO/IEC 80000. The standard comes in 14 parts: ISO 31-0: General principles (replaced by ISO/IEC 80000-1:2009) ISO 31-1: Space and time...

ISO 3166-1 alpha-3 codes are three-letter country codes defined in ISO 3166-1, part of the ISO 3166 standard published by the International Organization...

ISO/IEC 8859-1, commonly referred to as Latin-1, is a character encoding in the ISO/IEC 8859 series of ASCII-based standard character encodings. It encodes...

ISO 50001 Energy management systems - Requirements with guidance for use, is an international standard created by the International Organization for Standardization...

a standard specified as a part of the MPEG-4 specifications, formally as ISO/IEC 14496-14:2003. Unlike the audio-only compression formats MP3 and MP2...

ISO/IEC 80000, Quantities and units, is an international standard describing the International System of Quantities (ISQ). It was developed and promulgated...

ISO 15919 is an international standard for the romanization of Indic scripts. Published in 2001, it is part of a series of romanization standards by the...

Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Each part is numbered: ISO/IEC 8859-1, ISO/IEC 8859-2, etc. There are...

ISO 20700 Guidelines for management consultancy services is an international standard developed for use as a guideline for people or organizations for...

Gulledge, September 10, 1989), better known by his stage name King Iso (formerly ISO and Reali-T), is an American rapper from Omaha, Nebraska. He is currently...

ISO 11784 and ISO 11785 are international standards that regulate the radio-frequency identification (RFID) of animals, which is usually accomplished...

objects, standardized by the International Organization for Standardization (ISO). DOIs are an implementation of the Handle System; they also fit within the...

and IEST petitioned to ISO for new standards, the first document of ISO 14644 was published in 1999, ISO 14644-1. In 2000, ISO 14644-2 was published,...

ISO 3166-2:GB is the entry for the United Kingdom of Great Britain and Northern Ireland (GBNI) in ISO 3166-2, part of the ISO 3166 standard published...

International standard ISO/IEC 11801 Information technology — Generic cabling for customer premises specifies general-purpose telecommunication cabling...

the International Organization for Standardization in ISO 3779 (content and structure) and ISO 4030 (location and attachment). There are vehicle history...

ISO/IEC 8859-15:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latin alphabet No. 9, is part of the ISO/IEC...

ISO 128 is the International Organization for Standardization (ISO) standard covering the general principles of presentation in technical drawings, specifically...

4999 ISO 5000 – ISO 7999 ISO 8000 – ISO 9999 ISO 10000 – ISO 11999 ISO 12000 – ISO 13999 ISO 14000 – ISO 15999 ISO 16000 – ISO 17999 ISO 18000 – ISO 19999...

ISO 3166-2:IN is part of the ISO 3166 standardization codes published by the International Organization for Standardization (ISO) for India. It is part...

ISO 10962, known as Classification of Financial Instruments (CFI), is a six-letter-code used in the financial services industry to classify and describe...

ISO/IEC 19790 is an ISO/IEC standard for security requirements for cryptographic modules. It addresses a wide range of issues regarding their implementation...

alone, up to 95% of intermodal containers comply with ISO standards, and can officially be called ISO containers. These containers are known by many names:...

IETF language tags combine subtags from other standards such as ISO 639, ISO 15924, ISO 3166-1 and UN M.49. For example, the tag en stands for English;...

ISO 9241 is a multi-part standard from the International Organization for Standardization (ISO) covering ergonomics of human-system interaction and related...

ISO 3166-2:US is the entry for the United States in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 14971 Medical devices — Application of risk management to medical devices is a voluntary consensus standard, published by International Organization...

ISO 9 is an international standard establishing a system for the transliteration into Latin characters of Cyrillic characters constituting the alphabets...

2012). "ISO publishes new standard for business continuity management". ISO. "ISO 22313:2020". ISO. "Iso/Ts 22317:2021". "Iso/Ts 22318:2021". "ISO/TS 22330:2018"...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 965 (ISO general purpose metric screw thread—tolerances) is an International Organization for Standardization (ISO) standard for metric screw thread...

known as ISO/IEC Guide 25, ISO/IEC 17025 was initially issued by ISO/IEC in 1999. There are many commonalities with the ISO 9000 standard, but ISO/IEC 17025...

ISO 21500, Guidance on Project Management, is an international standard developed by the International Organization for Standardization, or ISO starting...

ISO 690 is an ISO standard governing bibliographic references in different kinds of documents, including electronic documents. This international standard...

ISO C, and Standard C are successive standards for the C programming language published by the American National Standards Institute (ANSI) and ISO/IEC...

The ISO 10993 set entails a series of standards for evaluating the biocompatibility of medical devices to manage biological risk. These documents were...

ISO/IEC 27000 is one of the standards in the ISO/IEC 27000 series of information security management systems (ISMS)-related standards. The formal title...

ISO 6346 is an international standard covering the coding, identification and marking of intermodal (shipping) containers used within containerized intermodal...

ISO 1 is an international standard set by the International Organization for Standardization that specifies the standard reference temperature for geometrical...

Iso-LSD, also known as d-iso-LSD, (+)-iso-LSD, or (5R-8S)-LSD, as well as N,N-diethylisolysergamide, is a serotonin receptor modulator of the lysergamide...

ECMA-376. ISO and IEC standardized later versions as ISO/IEC 29500. Microsoft Office 2010 provides read support for ECMA-376, full support for ISO/IEC 29500...

Standardization (ISO) released CAN standard ISO 11898, which was later restructured into two parts: ISO 11898-1 which covers the data link layer, and ISO 11898-2...

ISO/IEC 27701 is an international standard for privacy information management systems (PIMS) published by the International Organization for Standardization...

tests. ISO 16750 has five parts: ISO 16750-1: General ISO 16750-2: Electrical loads ISO 16750-3: Mechanical loads ISO 16750-4: Climatic loads ISO 16750-5:...

stationery, cards, and for some printed documents. Most countries adhere to the ISO 216 standard, which includes the widely recognized A series (including A4...

engineering diagrams. ISO 10628 consists of the following parts: Part 1: Specification of Diagrams (ISO 10628-1:2014) Part 2: Graphical Symbols (ISO 10628-2:2012)...

The ISO/IEC 15288 Systems and software engineering — System life cycle processes is a technical standard in systems engineering which covers processes...

ISO 10012 is a standard published by the International Organization for Standardization (ISO) which defines requirements for measurement process management...

ISO/IEC 7816 is an international standard related to electronic identification cards with contacts, especially smart cards, and more recently, contactless...

ISO 7637 Road vehicles -- Electrical disturbances from conduction and coupling is an international electromagnetic compatibility vehicle standard published...

ISO 668 – Series 1 freight containers – Classification, dimensions and ratings is an ISO international standard which nominally classifies intermodal freight...

ISO 37001 Anti-bribery management systems - Requirements with guidance for use, is a management system standard published by International Organization...

reference model developed by the International Organization for Standardization (ISO) that "provides a common basis for the coordination of standards development...

ISO/IEC 15504 Information technology – Process assessment, also termed Software Process Improvement and Capability dEtermination (SPICE), is a set of...

Unicode) is a standard set of characters defined by the international standard ISO/IEC 10646, Information technology — Universal Coded Character Set (UCS) (plus...

Definition Schemas ISO/IEC 9075-12 - SQL Replication ISO/IEC 9075-13 - SQL/JRT ISO/IEC 9075-14 - SQL/XML ISO/IEC 9075-15 - SQL/MDA ISO/IEC 9075-16 - SQL/PGQ...

ISO/IEC 20000 is the international standard for IT service management. It was developed in 2005 by ISO/IEC JTC1/SC7 and revised in 2011 and 2018. It was...

defined in part two (ISO 639-2) of the standard, including the corresponding two-letter (ISO 639-1) codes where they exist. Where two ISO 639-2 codes are given...

The international standard ISO 233 establishes a system for romanization of Arabic script. It was supplemented by ISO 233-2 in 1993 which is specific for...

technology agreed upon by the ISO/IEC Moving Picture Experts Group (MPEG) (ISO/IEC JTC 1/SC29/WG11) under the formal standard ISO/IEC 14496 – Coding of audio-visual...

ISO 22000 is a food safety management system by the International Organization for Standardization (ISO) which is outcome focused, providing requirements...

ISO 21482 is a technical standard that specifies the design and usage of a "supplemental radiation warning symbol", a warning symbol. It is intended to...

Standardization (ISO), in particular, in ISO 14040 and ISO 14044. ISO 14040 provides the 'principles and framework' of the Standard, while ISO 14044 provides...

accordance with ISO 8178". Iso.org. 30 September 2007. Retrieved 18 July 2011. "ISO 1585:1992 - Road vehicles - Engine test code - Net power". Iso.org. 15 November...

ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards is an international standard that defines proximity cards...

locations. The first edition (ISO 6709:1983) was developed by ISO/IEC JTC 1/SC 32. Later the standard was transferred to ISO/TC211, Geographic information/Geomatics...

ISO 25119, titled "Tractors and machinery for agriculture and forestry – Safety-related parts of control systems", is an international standard for functional...

ISO 10218 is an international standard for industrial robot safety, developed by ISO/TC 184/SC 2 "Robots and robotic devices" in parallel with the European...

ISO 10303 can represent 3D objects in computer-aided design (CAD) and related information. A STEP-file is ASCII text with the format defined in ISO 10303-21...

Bosnian: ISO 639-1 code: bs; ISO 639-3 code: bos Chakavian: ISO 639-3 code: ckm Croatian: ISO 639-1 code: hr; ISO 639-3 code: hrv Montenegrin: ISO 639-3...

A number of ISO standards cover trailer connectors, the electrical connectors between vehicles and the trailers they tow that provide a means of control...

ISO/TC 37 is a technical committee within the International Organization for Standardization (ISO) that prepares standards and other documents concerning...

ISO/IEC 646 Information technology — ISO 7-bit coded character set for information interchange, is an ISO/IEC standard in the field of character encoding...

ISO 28000:2022, Security and resilience – Security management systems – Requirements, is a management system standard published by International Organization...

2001. May 2000 ISO/IEC 15445:2000 ("ISO HTML", based on HTML 4.01 Strict) was published as an ISO/IEC international standard. In the ISO, this standard...

ISO 8000 is the international standard for Data Quality and Master Data. Widely adopted internationally it describes the features and defines the requirements...

Standardization. ISO 10006:2018 gives guidance on the application of quality management in projects. It supersedes ISO 10006:2003. ISO 10006 is applicable...

symbology specification". ISO. Archived from the original on 3 January 2023. Retrieved 3 January 2023. "ISO/IEC 18004:2024". ISO. Retrieved 22 November 2025...

ISO 3166-3 is part of the ISO 3166 standard published by the International Organization for Standardization (ISO), and defines codes for country names...

ISO/IEC 9126 Software engineering — Product quality was an international standard for the evaluation of software quality. It has been replaced by ISO/IEC...

ISO 3166-1 numeric (or numeric-3) codes are three-digit country codes defined in ISO 3166-1, part of the ISO 3166 standard published by the International...

ISO 11783-1: General standard for mobile data communication ISO 18883-2: Physical layer ISO 11783-3: Data link layer ISO 11783-4: Network layer ISO 11783-5:...

ISO 14064 standard (initially published in 2006 and updated in 2018) is the core part of the ISO 14060 family of standards that are part of the ISO 14000...

A delta ISO is used to update an existing ISO image which contains RPM Package Manager (RPM) files. It utilizes DeltaRPMs, a form of delta compression...

"Iso 56000:2020". 17 December 2020. "Iso/Awi 56001". "Iso/Awi 56001". "Iso 56003:2019". 17 December 2020. "Iso/Tr 56004:2019". 17 December 2020. "Iso 56006:2021"...

ISO 55000 is an international standard covering management of assets of any kind. Before it, a Publicly Available Specification (PAS 55) was published...

ISO 259 is a series of international standards for the romanization of Hebrew characters into Latin characters, dating to 1984, with updated ISO 259-2...

ISO 15926 is a standard for data integration, sharing, exchange, and hand-over between computer systems. The title, "Industrial automation systems and...

ISO 25964 is the international standard for thesauruses, published in two parts as follows: ISO 25964 Information and documentation - Thesauri and interoperability...

ISO 21001, Educational Organization Management Systems, is a published international standard by the International Organization for Standardization, and...

Mitsuo Iso (磯 光雄, Iso Mitsuo; born 1966 in Aichi, Japan) is a Japanese animator and director. He worked as a freelance artist through Neomedia, Studio...

ISO 19092 Financial Services - Biometrics, released as ISO 19092 Financial Services - Biometrics - Part 1: Security framework, is an ISO standard and describes...

Standardization (ISO). It was developed by ISO Technical Committee 37, Subcommittee 2, and first published on May 15, 2008. It is part of the ISO 639 series...

of ISO 13584 is Industrial automation systems and integration - Parts library, with the acronym PLIB. PLIB is developed and maintained by the ISO technical...

ISO 15022 is an ISO standard for securities messaging used in transactions between financial institutions. Participants in the financial industry need...

ISO 26000 is a set of international standards for social responsibility. It was developed in November 2010 by International Organization for Standardization...

ISO/IEC 7810 Identification cards — Physical characteristics is an international standard that defines the physical characteristics for identification...

the international standard ISO 13616 under the International Organization for Standardization (ISO). The current version is ISO 13616:2020, which indicates...

ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems is an ISO/IEC standard series defining layout principles for computer...

ISO/IEC 2022 Information technology—Character code structure and extension techniques, is an ISO/IEC standard in the field of character encoding. It is...

The ISO basic Latin alphabet is an international standard (beginning with ISO/IEC 646) for a Latin-script alphabet that consists of two sets (uppercase...

ISO 15765-2, or ISO-TP (Transport Layer), is an international standard for sending data packets over a CAN bus. The protocol allows for the transport...

ISO/IEC 27002 is an information security standard published by the International Organization for Standardization (ISO) and by the International Electrotechnical...

ISO 3166-2:CH is the entry for Switzerland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 19600, Compliance management systems - Guidelines, is a compliance standard introduced by the International Organization for Standardization (ISO)...

ISO 31-0 is the introductory part of international standard ISO 31 on quantities and units. It provides guidelines for using physical quantities, quantity...

ISO 9564 is an international standard for personal identification number (PIN) management and security in financial services. The PIN is used to verify...

languages such as Ware below.) SIL codes are upper case; ISO codes are lower case. Once retired, ISO 639-3 codes are not reused. SIL codes that were retired...

List of ISO standards for transliterations and romanizations: ISO 3602:1989 (Romanization of Japanese (kana script)) ISO 7098:2015 (Romanization of Chinese)...

ISO 25178: Geometrical Product Specifications (GPS) – Surface texture: areal is an International Organization for Standardization collection of international...

Svalbard og Jan Mayen, ISO 3166-1 alpha-2: SJ, ISO 3166-1 alpha-3: SJM, ISO 3166-1 numeric: 744) is a statistical designation defined by ISO 3166-1 for a collective...

ISO 3166-2:CA is the entry for Canada in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO New England Inc. (ISO-NE) is an independent, non-profit regional transmission organization (RTO), headquartered in Holyoke, Massachusetts, serving...

ISO 3166-2:HK is the entry for Hong Kong in ISO 3166-2, which was published in 1998 by the International Organization for Standardization (ISO) to define...

such as those from the International Organization for Standardization (ISO) describe a different system which has some nuanced differences in its interpretation...

ISO 5964 was the ISO standard for the establishment and development of multilingual thesauri. Its full title was Guidelines for the establishment and development...

ISO 31-4 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to heat. It is superseded by ISO...

ISO/IEC 8859-10:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 10: Latin alphabet No. 6, is part of the ISO/IEC...

ISO/IEC 10646, a 32-bit character set since 1990 It may also refer to: ISO basic Latin alphabet ISO/IEC 2022 ISO 2033 ISO 2047 ISO 5426 ISO 5427 ISO 5428...

ISO/IEC 8859-9:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5, is part of the ISO/IEC 8859...

Iso-damping is a desirable system property referring to a state where the open-loop phase Bode plot is flat—i.e., the phase derivative with respect to...

ISO 7736 is a standard size for dashboard mounted head units, for car audio. It was originally established by the German national organization for standardization...

Technical Committee 212 (ISO/TC 212). ISO/TC 212 assigned ISO 15189 to a working group to prepare the standard based on the details of ISO/IEC 17025:1999 General...

ISO 3166-2:BR is the entry for Brazil in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Lists of ISO 639 codes are: List of ISO 639-1 codes, with corresponding ISO 639-2 and ISO 639-3 codes List of ISO 639-2 codes, with corresponding ISO 639-1...

Shoes" (based on ISO 2816:1973) and GOST 11373-88 "Shoe Sizes" (based on ISO 3355:1975), and lately by GOST R 58149-2018 (based on ISO 9407:1991) Standard...

ISO 22300:2025 Security and resilience – Vocabulary, is an international standard developed by the International Organization for Standardization Technical...

ISO 4 (Information and documentation — Rules for the abbreviation of title words and titles of publications) is an international standard which defines...

ISO 2709 is an ISO standard for bibliographic descriptions, titled Information and documentation—Format for information exchange. It is maintained by the...

Creation and delegation of ccTLDs is described in RFC 1591, corresponding to ISO 3166-1 alpha-2 country codes. While gTLDs have to obey international regulations...

million characters. The Unicode character repertoire is synchronized with ISO/IEC 10646, each being code-for-code identical with one another. However,...

ISO 17100:2015 Translation Services-Requirements for Translation Services was published on May 1, 2015. It was prepared by the International Organization...

ISO 31-6 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to light and related electromagnetic...

1992) is the ISO standard describing the International System of Units (SI). The ISO 1000:1992 standard was withdrawn in 2009 together with ISO 31, and are...

commercial trade names such as: Iso E Super, Iso Gamma Super, Anthamber, Amber Fleur, Boisvelone, Iso Ambois, Amberlan, Iso Velvetone, Orbitone, Amberonne...

ISO 3166-2:ES is the entry for Spain in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

predate ISO standardization and were developed by Kodak. ISO order page for ISO 732:1982 ISO order page for ISO 732:1991 ISO order page for ISO 732:2000...

UltraISO is a crippleware application for Microsoft Windows for creating, modifying and converting ISO image files used for optical disc authoring, currently...

sovereign states and self-governing dependent territories based upon the ISO standard ISO 3166-1. The list also includes unrecognized but de facto independent...

ISO/IEC 27040 is part of a growing family of International Standards published by the International Organization for Standardization (ISO) and the International...

ISO 3166-2:ID is the entry for Indonesia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 13567 is an international computer-aided design (CAD) layer standard The standard is divided into three parts: ISO 13567-1:2017 Technical product documentation...

ISO 31-8 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to physical chemistry and molecular...

ISO 3166-2:IT is the entry for Italy in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/IEC 15693, is an ISO/IEC standard for Contactless vicinity objects (vicinity cards and security devices ), i.e. objects which can be read from a greater...

ISO 7027:1999 is an ISO standard for water quality that enables the determination of turbidity. The ISO 7027 technique is used to determine the concentration...

The Iso Lele (or Iso Rivolta Lele) is a grand tourer that was produced by the Italian automobile manufacturer Iso Automoveicoli S.p.A. between 1969 and...

success, also notes that the ISO EBNF is not even used in all ISO standards. This article uses EBNF as specified by the ISO for examples applying to all...

ISO/IEC 5218 Information technology — Codes for the representation of human sexes is an international standard that defines a representation of human...

ISO 5426 ("Extension of the Latin alphabet coded character set for bibliographic information interchange") is a character set developed by ISO, similar...

ISO 3166-2:RU is the entry for Russia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO/IEC 18014 Information technology — Security techniques — Time-stamping services is an international standard that specifies time-stamping techniques...

ISO 3166-2:CN is the entry for China in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Experts Group (MPEG) is an alliance of working groups established jointly by ISO and IEC that sets standards for media coding, including compression coding...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO/IEC 8652 Information technology — Programming languages — Ada is the international standard for the computer programming language Ada. It was produced...

ISO 3166-2:AU is the entry for Australia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

The ISO/IEC 27000 family (also known as the 'ISMS Family of Standards', 'ISO27K', or 'ISO 27000 series') comprises information security standards published...

ISO 18245 is an ISO standard concerning the assignment of merchant category codes (MCC) in retail financial services. These are used to control usage...

ISO 20121 (full name: ISO 20121:2012, Event sustainability management systems –- Requirements with guidance for use) is a voluntary international standard...

ISO/IEC 8859-4:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin alphabet No. 4, is part of the ISO/IEC 8859...

ISO 3166-2:CD is the entry for the Democratic Republic of the Congo in ISO 3166-2, part of the ISO 3166 standard published by the International Organization...

ISO 31-1 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to space and time. It was superseded...

ISO 10303 (Automation systems and integration — Product data representation and exchange) is a family of ISO standards for computer-interpretable representation...

ISO/IEC/IEEE 42010 Systems and software engineering — Architecture description is an international standard for architecture descriptions of systems and...

defined in ISO 646 (ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429)....

Ganda Iso (or Ganda Izo, meaning "Sons of Land") is a paramilitary group that emerged in Northern Mali in the late 2000s and has been active during the...

ISO 3166-2:MX is the entry for Mexico in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between...

ISO/IEC 24727-1:2014 Part 1: Architecture ISO/IEC 24727-2:2008 Part 2: Generic card interface ISO/IEC 24727-3:2008 Part 3: Application interface ISO/IEC...

ISO/IEC TR 12182 is an Information technology standard published in 1998 by the Joint Task Committee 1 (JTC1) of the International Organization for Standardization...

ISO 10160 is the ISO standard, first published in 1993, that defines the terminology that is used for interlibrary loan transactions between various document...

ISO/IEC 18000, an international standard that describes a series of diverse RFID technologies, each using a unique frequency range OHSAS 18001, an internationally...

ISO 13849 is a safety standard which applies to parts of machinery control systems that are assigned to providing safety functions (called safety-related...

The ISO 14031:2013 Environmental management - Environmental Performance Evaluation – Guidelines standard by the International Organization for Standardization...

ISO/IEC 27006 is an information security standard published by the International Organization for Standardization (ISO) and the International Electrotechnical...

ISO 6344 is an international standard covering the definition and measurement of particle size for fused alumina (i.e., corundum) and silicon carbide...

ISO 31-7 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to acoustics. It is superseded by...

ISO 3166-2:DE is the entry for Germany in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

standard ISO/IEC/IEEE 60559:2011 (with content identical to IEEE 754-2008) has been approved for adoption through ISO/IEC JTC 1/SC 25 under the ISO/IEEE PSDO...

2025-04-26. "ISO 19011:2018". ISO. Retrieved 2025-04-26. "ISO 10011-1:1990". ISO. Retrieved 2025-04-26. "ISO 19011:2002". ISO. Retrieved 2025-04-26. "ISO 19011:2011"...

ISO/IEC 8859-5:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/Cyrillic alphabet, is part of the ISO/IEC...

ISO 14224 Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment is the International...

The ISO 639-3 code gsw refers to the Alemannic varieties: Alsatian, Alemannic dialects spoken in most of Alsace Swiss German, Alemannic dialects spoken...

Iso-Polyphony (Albanian: Iso-polifonia) is a traditional part of Albanian folk music and, as such, is included in UNESCO's intangible cultural heritage...

ISO 3166-2:NL is the entry for the Kingdom of the Netherlands in ISO 3166-2, part of the ISO 3166 standard published by the International Organization...

ISO 13399 (Cutting tool data representation and exchange) is an international technical standard by ISO (the International Organization for Standardization)...

ISO 3166-2:PL is the entry for Poland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/IEC 17024: Conformity assessment - General requirements for bodies operating certification of persons is an ISO/IEC standard which specifies criteria...

ISO/IEC 8859-3:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3, is part of the ISO/IEC 8859...

ISO 2047 (Information processing – Graphical representations for the control characters of the 7-bit coded character set) is a standard for graphical...

ISO-IR-182 is a Welsh variant of ISO/IEC 8859-1 that supports the Welsh language. However, it lacks the letters used in the Irish language (which are in...

ISO 10161 is the ISO standard, first published in 1993, that defines the interlibrary loan (ILL) application protocol for communication between various...

ISO 6943 is a specification created by the International Organization for Standardization for a method in determining the tension fatigue of vulcanised...

ISO/IEC 38500 is an international standard for Corporate governance of information technology published jointly by the International Organization for...

ISO/IEC 9529 (Information processing systems — Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording...

ISO/IEC 8859-2:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin alphabet No. 2, is part of the ISO/IEC 8859...

ISO 3166-2:BE is the entry for Belgium in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

specifications have been based on TIFF 6.0, including TIFF/EP (ISO 12234-2), TIFF/IT (ISO 12639), TIFF-F (RFC 2306) and TIFF-FX (RFC 3949). TIFF was created...

Standardization based on ISO 9001, and the first edition was published in June 1999 as ISO/TS 16949:1999. IATF 16949:2016 replaced ISO/TS 16949 in October...

Volmari "Vomma" Fritijof Iso-Hollo (5 January 1907 – 23 June 1969) was a Finnish runner. He competed at the 1932 and 1936 Olympics in the 3000 m steeplechase...

ISO 6862 is an International Standard and a character set developed by ISO. "ISO 6862:1996(en). Information and documentation". ISO. "Mathematical coded...

ISO 14155 Clinical investigation of medical devices for human subjects -- Good clinical practice This international standard addresses good clinical practices...

ISO 3166-2:JP is the entry for Japan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/IEC 21827 (SSE-CMM – ISO/IEC 21827) is an international standard based on the Systems Security Engineering Capability Maturity Model (SSE-CMM) developed...

ISO/IEC 8859-6:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/Arabic alphabet, is part of the ISO/IEC 8859...

ISO 3166-2:PE is the entry for Peru in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 12006 is within the discipline of architecture for building construction. ISO 12006 "Building construction - Organization of information about construction...

ISO 15971 is an ISO standard for calorific value measurement of natural gas and its substitutes. The methods it covered does not involve gas composition...

The International Standard ISO 6385 "Ergonomic principles in the design of work systems" is published by the International Organization for Standardization...

ISO/IEC 18000-3 is an international standard for passive RFID item level identification and describes the parameters for air interface communications...

ISO 1629, Rubber and latices – Nomenclature is an ISO standard. This standard was originally published in 1976, and was updated in 1987, 1995 (with amendments...

ISO 3166-2:AR is the entry for Argentina in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

International standards in the ISO/IEC 19770 family of standards for IT asset management address both the processes and technology for managing software...

ISO/IEC/IEEE 12207 Systems and software engineering – Software life cycle processes is an international standard for software lifecycle processes. Introduced...

ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems is an early ISO standard defining a Telex-oriented...

ISO 20400:2017 Sustainable procurement — Guidance is a standard by the International Organization for Standardization (ISO) that provides guidance to organizations...

ISO/TC 279 is a technical committee of the International Organization for Standardization (ISO). Its purpose is to develop, maintain and promote standards...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

The Iso Varedo was a concept car produced by Italian car manufacturer Iso Autoveicoli S.p.A. in 1972 styled by Ercole Spada. It was unveiled at the 1972...

ISO 24617-1:2009, ISO-TimeML is the International Organization for Standardization ISO/TC37 standard for time and event markup and annotation. The scope...

ISO 10007 "Quality management — Guidelines for configuration management" is the ISO standard that gives guidance on the use of configuration management...

ISO 22395:2018, Security and resilience -- Community resilience -- Guidelines for supporting vulnerable persons in an emergency, is an international standard...

technical standard defined by ISO which describes title block formats to be used in technical drawings. ISO 7200:1984 ISO 7200:2004 ISO 128 for the general principles...

ISO 3166-2:AT is the entry for Austria in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 3166-2:FR is the entry for France in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

the ISO 17442 "Financial services — Legal entity identifier (LEI)" standard developed by the International Organization for Standardization (ISO). It...

clearing, reporting and settlement of trades. Its structure is defined in ISO 6166. The ISIN code is a 12-character alphanumeric code that serves for uniform...

ISO 6438:1983, Documentation — African coded character set for bibliographic information interchange, is an ISO standard for an 8-bit character encoding...

ISO/IEC 4909 is a 2006 international standard produced by the International Organization for Standardization (ISO) and the International Electrotechnical...

ISO 3166-2:IL is the entry for Israel in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

KOI8-F). The name "ISO-IR-111" refers to its registration number in the ISO-IR registry, and denotes it as a set usable with ISO/IEC 2022. It was defined...

The ISO/IEC 11179 metadata registry (MDR) standard is an international ISO/IEC standard for representing metadata for an organization in a metadata registry...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 31-11:1992 was the part of international standard ISO 31 that defines mathematical signs and symbols for use in physical sciences and technology....

ISO/IEC 13490 (also known as ECMA-168) is the successor to ISO 9660 (level 3), intended to describe the file system of a CD-ROM or CD-R. ISO 13490 has...

ISO/IEC 14651:2016, Information technology -- International string ordering and comparison -- Method for comparing character strings and description of...

Diagrams, showing dimensions of tubing and fittings ISO 7-1:1994 ISO 7-2:2000 ISO 228-1:2000 ISO 228-2:1987 Parallel pipe threads G Parallel pipe threads...

ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits with ISO 9001:2000 is an International standard issued by...

ISO 3166-2:BG is the entry for Bulgaria in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 15489 Information and documentation—Records management is an international standard for the management of business records, consisting of two (2)...

ISO 3166-2:EE is the entry for Estonia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO. "ISO 22316:2017". ISO. 15 September 2020. "ISO 28001:2007". ISO. "ISO 28003:2007". ISO. "ISO 28004-1:2007". ISO. "ISO 28004-3:2014". ISO. "ISO 28004-4:2014"...

other national variants of ISO/IEC 646, a German, French, or Swedish, etc. programmer using their national variant of ISO/IEC 646, rather than ASCII,...

ISO 3166-2:EC is the entry for Ecuador in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Ritchie (1978), p. 3. "Committee Draft ISO/IEC 9899:TC3: 5.2.1 Character sets". 2007. "ISO/IEC 9899:201x (ISO C11) Committee Draft" (PDF). open-std.org...

ISO/IEC 27005 "Information technology — Security techniques — Information security risk management" is an international standard published by the International...

This is a list of ISO 639-3 language codes starting with A. Index | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u...

ISO 3166-2:GE is the entry for Georgia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/IEC 7812 Identification cards – Identification of issuers is an international standard published jointly by the International Organization for Standardization...

ISO 13406-2 is an ISO standard, with the full title "Ergonomic requirements for work with visual displays based on flat panels -- Part 2: Ergonomic requirements...

ISO screw thread may refer to: ISO metric screw thread ISO inch screw thread This disambiguation page lists articles associated with the title ISO screw...

ISO 3166-2:HU is the entry for Hungary in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:DK is the entry for Denmark in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:PK is the entry for Pakistan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 5427 is an 8-bit extension to the KOI-7 N1 character set, which was standardised by the ISO. The first half was published in 1979, and the second...

ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and...

ISO 3166-2:KZ is the entry for Kazakhstan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

accurate measurements. ISO 8653:2016 defines standard ring sizes in terms of the inner circumference of the ring measured in millimetres. ISO sizes are used in...

ISO 25500: Supply chain interoperability and integration — Part 1: Overview and principles of the Industrial Internet is a Draft International Standard...

ISO/IEC 15897 (Procedures for the registration of cultural elements) is an ISO/IEC standard for the registration of new POSIX locales and POSIX charmaps...

ISO 3166-2:NZ is the entry for New Zealand in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 31-5 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to electricity and magnetism. It...

ISO/IEC 6523, Information technology – Structure for the identification of organizations and organization parts, is an international standard that defines...

ISO/IEC 27018 Information technology — Security techniques — Code of practice for protection of personally identifiable information (PII) in public clouds...

ISO 39001:2012 Road traffic safety (RTS) management systems - Requirements with guidance for use is an ISO standard for a management system (similar to...

shaken) ISO/IEC JTC 1/SC 28 ISO/IEC 19752:2004 at www.iso.org ISO/IEC 19752:2017 "ISO/IEC 19752:2017". www.iso.org. Retrieved 2022-07-21. ISO Standard...

ORCID "ISO Online Browsing Platform". www.iso.org. Retrieved 2025-04-26. "ISO/IEC 7064:2003". ISO. Retrieved 2025-04-26. "ISO 7064:1983". ISO. Retrieved...

delimiters. ISO 11940-2 is an ISO standard for a simplified transcription of the Thai language into Latin characters. The full standard ISO 11940-2:2007...

The Iso Fidia (or Iso Rivolta Fidia), initially Iso Rivolta S4, is a four-door sedan which was produced by the Italian automobile maker Iso Automoveicoli...

the course for ISO standards development and strategy: participates and votes in ISO technical and policy meetings; sells and adopts ISO standards nationally...

ISO 3166-2:SA is the entry for Saudi Arabia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 8178 is a collection of steady state test cycles used for defining emission standards for non-road engines in the European Union, United States, Japan...

l-Iso-LSD, also known as (–)-iso-LSD or (5S,8R)-iso-LSD, as well as l-isolysergic acid diethylamide, is a lysergamide and one of four possible stereoisomers...

ISO 3166-2:PT is the entry for Portugal in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 19114 Geographic information - Quality evaluation procedures provides a procedural framework for evaluating the quality of digital geographic datasets...

Tomiaki Iso (礒 富昭, Iso Tomiaki; born 20 April 1954) is a Japanese rower. He competed in the men's eight event at the 1976 Summer Olympics. Evans, Hilary;...

ISO 999 (Information and documentation—Guidelines for the content, organization and presentation of indexes) is an ISO standard which provides the information...

ISO 3166-2:BQ is the entry for Bonaire, Sint Eustatius and Saba in ISO 3166-2, part of the ISO 3166 standard published by the International Organization...

The ISO-standard ISO 15398 regulates the minimum requirements, proofs of suitability and auditing standards for manhole covers made of thermoplastics....

ISO/TR 11941:1996 (Information and documentation — Transliteration of Korean script into Latin characters) is a Korean romanization system used in International...

an ISO standard covering petroleum products, developed by ISO's Technical Committee (TC) 28: Petroleum products and lubricants. According to ISO's abstract...

Food safety ISO 874 ISO 2859 ISO 3951 ISO 5667 - contains the guidances of water sampling for food industries ISO 6206 ISO 8213 List of ISO standards United...

ISO/IEC 7813 is an international standard codified by the International Organization for Standardization and International Electrotechnical Commission...

ISO 3166-2:MA is the entry for Morocco in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 9897 is an ISO international standard for electronic interchange relating to freight containers. It is also known as 'CEDEX' as an acronym of Container...

shoe are defined by the International Organization for Standardization (ISO) in ISO 518:2006. Details such as trigger voltage are not standardised; electrical...

Perazhagi ISO (transl. Beautiful girl ISO) is a 2019 Indian Tamil-language science fiction film directed by C. Vijayan. It stars Shilpa Manjunath and...

Iso lo is a 1994 documentary film. A glimpse into Ismaël Lô's musical universe. Shot during one of his tours, this peregrination into Africa's heart directed...

ISO 2146 is an ISO standard defining an information model for "registry services for libraries and related organisations". Operating at a higher level...

ISO 11940 is an ISO standard for the transliteration of Thai characters, published in 1998, updated in September 2003, and confirmed in 2008. A most notable...

ISO/IEC 10116 Information technology — Security techniques — Modes of operation for an n-bit block cipher is an international standard that specifies...

ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet, is part of the ISO/IEC 8859 series...

ISO 3166-2:IE is the entry for Ireland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:EG is the entry for Egypt in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

CEN ISO/IEEE 11073 Health informatics - Medical / health device communication standards enable communication between medical, health care and wellness...

ISO 3166-2:ZA is the entry for South Africa in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3166-2:NO is the entry for Norway in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:MY is the entry for Malaysia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Videotex. It is registered with the ISO-IR registry for use with ISO/IEC 2022 as ISO-IR-165, and encodable in the ISO-2022-CN-EXT code version. It is an...

PDF/A is an ISO-standardized version of the Portable Document Format (PDF) specialized for use in the archiving and long-term preservation of electronic...

International Organization for Standardization (ISO) adopted the ANSI symbols in 1970. The current standard, ISO 5807, was published in 1985 and last reviewed...

the standard library for the C programming language, as specified in the ISO C standard. Starting from the original ANSI C standard, it was developed...

Iso is an Indo-Pacific genus of silversides, commonly called surf sardines, the only genus in the monogeneric family Isonidae, they were formerly classified...

ISO 3166-2:AE is the entry for the United Arab Emirates in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 2788 was the ISO international standard for monolingual thesauri for information retrieval, first published in 1974 and revised in 1986. The official...

ISO 898 is an international standard that defines mechanical and physical properties for metric fasteners. This standard is the origin for other standards...

ISO/IEC 8859-13:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 13: Latin alphabet No. 7, is part of the ISO/IEC...

ISO/IEC 20248 Automatic Identification and Data Capture Techniques – Data Structures – Digital Signature Meta Structure is an international standard specification...

2018-02-24. ISO/TS 80004-1:2023 ISO/TS 80004-2:2015 ISO/TS 80004-3:2020 ISO/TS 80004-4:2011 ISO/TS 80004-5:2011 ISO/TS 80004-6:2021 ISO/TS 80004-7:2011 ISO/TS...

ISO 3166-2:IS is the entry for Iceland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 14698 Standards features two International Standards on biocontamination control for cleanrooms. IEST, the Secretariat and Administrator of ISO Technical...

functions. ISO/IEC 33001:2015 is a revision of ISO/IEC 15504, also termed Software Process Improvement and Capability Determination (SPICE). The ISO/IEC 330xx...

ISO 639-3 code bnv may refer to the following Papuan languages of Indonesia: Bonerif language Edwas language, or Beneraf language This disambiguation...

ISO 44001 Collaborative business relationship management systems – Requirements and framework is an international standard published on 1 March 2017 by...

ISO 3166-2:AZ is the entry for Azerbaijan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3977 is an international standard related to the design and procurement of gas turbine system applications. ISO 3977 is based primarily on the ASME...

ISO 19439:2006 Enterprise integration—Framework for enterprise modelling, is an international standard for enterprise modelling and enterprise integration...

ISO 31-3 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to mechanics. It was published on...

ISO 3166-2:KP is the entry for North Korea (officially the Democratic People's Republic of Korea) in ISO 3166-2, part of the ISO 3166 standard published...

The ISO base media file format (ISOBMFF) is a container file format that defines a general structure for files that contain time-based multimedia data...

ISO 11992 (Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles) is a CAN-based vehicle bus...

Iso H (real name: Carl Henrik Rosenberg), born 11 January 1979 in Helsinki, is a Finnish rapper. Together with his colleague Elastinen, he formed the...

The ISO 217:2013 standard defines the RA and SRA paper formats. These paper series are untrimmed raw paper. RA stands for "raw format A" and SRA stands...

ISO/IEC 27001 Lead Implementer is a professional certification for professionals specializing in information security management systems (ISMS) based...

ISO 3166-2:CZ is the entry for Czechia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO/IEC 7811 Identification cards — Recording technique is a set of nine (7811-1 to 7811-9) standards describing the recording technique on identification...

MagicISO (also referred to as MagicISO Maker) is a discontinued CD/DVD image shareware utility that can extract, edit, create, and burn disc image files...

ISO 5776, published by the International Organization for Standardization (ISO), is an international standard that specifies symbols for proofreading such...

under the control of an International Organization for Standardization (ISO) committee of industry experts. Development of PDF began in 1991 when Adobe's...

ISO 15686 is the in development ISO standard dealing with service life planning. It is a decision process which addresses the development of the service...

ISO/IEC 8859-14:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 8 (Celtic), is part of the...

ISO 843 is a system for the transliteration and/or transcription of Greek characters into Latin characters. It was released by the International Organization...

message handling systems. ISO/IEC 10021-1:2003 Part 1: System and service overview ISO/IEC 10021-2:2003 Overall architecture ISO/IEC 10021-4:2003 Message...

ISO 3166-2:KR is the entry for South Korea (officially the Republic of Korea) in ISO 3166-2, part of the ISO 3166 standard published by the International...

ISO/IEC/IEEE 29119 Software and systems engineering -- Software testing is a series of five international standards for software testing. First developed...

ISO 31-10 is the part of international standard ISO 31 that defines names and symbols for quantities and units related to nuclear reactions and ionizing...

ISO 3166-2:BA is the entry for Bosnia and Herzegovina in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO/TC 68 is a technical committee formed within the International Organization for Standardization (ISO), of Geneva, Switzerland, tasked with developing...

ISO/TC 46 is Technical Committee 46 of the International Organization for Standardization (ISO), responsible for matters concerning information, indexing...

numerous ISO standards, including the ISO 9000 Series, the ISO 14000 Series, and the AS9100 standard for aerospace. He authored the textbook ISO 9000: Meeting...

ISO-8859-8-I is the IANA charset name for the character encoding ISO/IEC 8859-8 used together with the control codes from ISO/IEC 6429 for the C0 (00–1F...

ISO 3166-2:TH is the entry for Thailand in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Israel "Iso" Szajewicz (1910–1941) was a Polish-Jewish composer and conductor born in Kutno, Poland. His parents, Dineh and Józef Szajewicz, were Yiddish...

Iso-Pyhäntä is a medium-sized lake in northern Finland, 15 km southeast of Ristijärvi settlement. It belongs to the Oulujoki main catchment area. It is...

cargo. It is built to the ISO standards, making it suitable for different modes of transportation; as such, it is also called an ISO tank. Both hazardous and...

ISO/IEC 24744 Software Engineering — Metamodel for Development Methodologies is an ISO/IEC standard for software engineering metamodelling for development...

ISO 3166-2:BY is the entry for Belarus in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

The ISO 15926 is an interoperability standard in the process industry. ISO 15926 includes the Work in Progress (WIP) database. WIP is available online...

The ISO/TC 215 is the International Organization for Standardization's (ISO) Technical Committee (TC) on health informatics. TC 215 works on the standardization...

and 2024. Faiyaz founded the independent creative agency and record label ISO Supremacy in 2023, which has signed fellow DMV native, Tommy Richman. Christopher...

query language for property graphs first described in ISO/IEC 39075, released in April 2024 by ISO/IEC. The GQL project is the culmination of converging...

ISO 14617 Graphical symbols for diagrams is a library of graphical symbols for diagrams used in technical applications. ISO 14617 consists of the following...

Iso Sluijters (born 24 July 1990) is a Dutch handball player for GC Amicitia Zürich and the Dutch national team. He represented the Netherlands at the...

ISO 3166-2:BF is the entry for Burkina Faso in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3166-2:GR is the entry for Greece in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

invented by Dr. Ynjiun P. Wang at Symbol Technologies in 1991. It is defined in ISO 15438. The PDF417 bar code (also called a symbol) consists of 3 to 90 rows...

ISO 639-6, Codes for the representation of names of languages—Part 6: Alpha-4 code for comprehensive coverage of language variants, was a proposed international...

ISO-IR-197 (known by the ISO-IR registration number of its GR set) is an 8-bit, single-byte character encoding which was designed for the Sámi languages...

An iso, short for isolation and also known as a halfback lead, is a simple run play in American football which is designed to isolate the fullback on...

pension fund. The ISO 55000 series of standards, developed by ISO TC 251, is the international standards for asset management. ISO 55000 provides an introduction...

ISO 11170:2003 is an international standard which defines a sequence of tests for verifying filter elements. It can be used to check their hydraulic,...

ISO 11446:2004 specifies a 13-pole electrical connector between towing and towed vehicles with 12 volt electrical system. It was developed in 1987 by...

Iso-butomidate is an anesthetic drug related to etomidate, which has been sold as a designer drug as an active ingredient in e-cigarette liquids marketed...

ISO/IEC 21838 is a multi-part standard published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission...

ISO 37120 Sustainable development of communities -- Indicators for city services and quality of life establishes and defines the methodologies for a set...

Iso Lamujärvi is a medium-sized lake in the Siikajoki main catchment area. It is located in the region Northern Ostrobothnia in Finland. There are eight...

The ISO 2033:1983 standard ("Coding of machine readable characters (MICR and OCR)") defines character sets for use with Optical Character Recognition...

Organization for Standardization as ISO 14230. One underlying physical layer used for KWP2000 is identical to ISO 9141, with bidirectional serial communication...

ISO/IEC 8859-7:2003, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/Greek alphabet, is part of the ISO/IEC 8859...

ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources is a multi-part standard prepared by subcommittee...

ISO 3166-2:LT is the entry for Lithuania in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3166-2:SH is the entry for Saint Helena, Ascension and Tristan da Cunha in ISO 3166-2, part of the ISO 3166 standard published by the International...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 2848 (Building construction – Modular coordination – Principles and rules) is an international standard for the construction industry that describes...

ISO/IEC 8859-16:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No. 10, is part of the ISO/IEC...

data link layers such as CAN (ISO 11898), LIN (ISO 17987), Ethernet (ISO 13400), FlexRay (ISO 17458), and K-Line (ISO 14230). In practice, UDS is most...

ISO 12944 is an international standard on corrosion protection of steel structures by protective paint systems. It consists of several parts: Part 1:...

ISO Technical Committee 67 – Oil and gas industries including lower carbon energy is a technical committee within the International Organization for Standardization...

Orzu Iso (Tajik: Орзу Исо, Persian: آرزو عیسی, or Orzu Isoev; born 14 October 1976 in Kulab, Kulab region) is a Tajik presenter, TV and radio journalist...

Iso Omena (Finnish for "Big Apple") is a shopping centre in Matinkylä, Espoo, Finland, opened on September 24, 2001. The construction of Iso Omena aimed...

This is a list of ISO technical committees. International Organization for Standardization (ISO) is a standards-making body, similar to the International...

ISO/IEC 8859-11:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet, is part of the ISO/IEC 8859...

MPEG-4 Part 3 or MPEG-4 Audio (formally ISO/IEC 14496-3) is the third part of the ISO/IEC MPEG-4 international standard developed by Moving Picture Experts...

For product and manufacturing information, STEP-XML is a short term for ISO 10303-28, Industrial automation systems and integration—Product data representation...

and has MIB 52. It is also known as iso-ir-50 (after the ISO 2022 registration of its G1 set) and csISO50INIS8. ISO-IR-51, "INIS Cyrillic Extension", is...

Iso-Syöte is the southernmost fell in Finland, adjacent to the Syöte National Park that is named after the fell. Located approximately 150 kilometres...

ISO 3166-2:TT is the entry for Trinidad and Tobago in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 3166-2:CS was the entry for Serbia and Montenegro in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

other parameters. Besides this ISO 2859-2 Sampling plans indexed by limiting quality (LQ) for isolated lot inspection and ISO 2859-3 Sampling procedures for...

ISO 3166-2:HR is the entry for Croatia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 2921 is a specification created by the International Organization for Standardization for a method in determining the temperature-retraction characteristics...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

ISO 3166-2:BD is the entry for Bangladesh in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 5428:1984, Greek alphabet coded character set for bibliographic information interchange, is an ISO standard for an 8-bit character encoding for the...

enterprise and service provider networks. The IS-IS protocol is defined in ISO/IEC 10589:2002 as an international standard within the Open Systems Interconnection...

The ISO/IEC 27001 Lead Auditor certification consists of a professional certification for auditors specializing in information security management systems...

Standardization (ISO) and the International Electrotechnical Commission (IEC) under the joint ISO and IEC subcommittee, ISO/IEC JTC 1/SC 27. It is based on ISO/IEC...

for Standardization (ISO) standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue. The standards...

Countess Iso Mutsu (陸奥 イソ, Mutsu Iso; 1867 – 1930), born Gertrude Ethel Passingham, was a British writer. She married a Japanese nobleman and diplomat...

ISO/IEC 10967, Language independent arithmetic (LIA), is a series of standards on computer arithmetic. It is compatible with IEEE 754 (also published...

for Standardization and the International Electrotechnical Commission as ISO/IEC 7501-1) and have a special machine-readable zone (MRZ), which is usually...

Iso-Heikkilä Observatory (Finnish: Iso-Heikkilän tähtitorni, Swedish: Storheikkilä observatorium) is an amateur astronomical observatory used by a local...

ISO is an International Sailing Federation (ISAF) class of two-person sailing dinghy with a single trapeze and an asymmetric spinnaker. The ISO was designed...

ISO 9060, Specification and classification of instruments for measuring hemispherical solar and direct solar radiation, is an ISO standard for the classification...

ISO 3166-2:MK is the entry for North Macedonia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

by the International Organization for Standardization (ISO), it is defined in the standard ISO/IEC 13239:2002. HDLC ensures reliable data transfer, allowing...

levels 2 and 3 of ISO/IEC 4873 (as opposed to ISO/IEC 8859, which defines character encodings at level 1 of ISO/IEC 4873). The parts of ISO/IEC 8859 define...

ISO 3166-2:UY is the entry for Uruguay in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

folk iso-polyphony (Albanian iso-polyphony) has been proclaimed by UNESCO a "Masterpiece of the Oral and Intangible Heritage of Humanity". The term iso refers...

ISO. "Freely Available Standards". ISO. "ISO 22301:2019". ISO. 5 June 2023. "ISO 22313:2020". ISO. "ISO 22315:2014". ISO. "ISO/TS 22317:2015". ISO. "ISO/TS...

mark that was also compliant with key ISO standards, especially ISO 14024- Type I Ecolabels that undertake ISO 14040 compliant life cycle analysis as...

H.262 or MPEG-2 Part 2 (formally known as ITU-T Recommendation H.262 and ISO/IEC 13818-2, also known as MPEG-2 Video) is a video coding format standardised...

ISO 3166-2:TL is the entry for Timor-Leste (East Timor) in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

attachment of sounds to object shapes Pictogram ISO 7010 – ISO standard for safety symbols ISO 7001 – ISO standard for public information symbols. GHS hazard...

currently at its 5th edition, from 1991. It is also adopted by ISO and IEC as standard ISO/IEC 6429. A version is adopted as a Japanese Industrial Standard...

International Organization for Standardization has assigned the ISO 3166-1 alpha-2 country code ISO 3166-2:BQ for these islands. The IANA has not established...

February 2021. "ISO 9000-3:1997". ISO. "ISO/IEC 90003:2014". ISO. ISO/IEC 90003—Software engineering -- Guidelines for the application of ISO 9001 to computer...

ISO 3166-2:FI is the entry for Finland in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:UZ is the entry for Uzbekistan in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO 20471 is an International Organization for Standardization technical standard describing requirements for high-visibility clothing, along with methods...

list of ISO 639 codes and IETF language tags (BCP 47) for individual constructed languages, complete as of January 2023[update]. ISO 639-2 and ISO 639-5...

Iso-Naakkima is a lake in Southern Savonia, Finland, about 10 km south of the town of Pieksämäki. It is notable for having an eroded impact crater under...

IEC-P27-1 (or ISO IR-143) is an 8-bit character set developed by the IEC. When combined with the ISO/IEC 646 character set, this includes all characters...

ISO/IEC 27004 Information Technology – Security techniques – Information Security Management – Monitoring, measurement, analysis and evaluation is an...

Iso Roobertinkatu (Swedish: Stora Robertsgatan), meaning "great Robert street", is a street running northeast-southwest in the Punavuori district in Helsinki...

ISO 3166-2:IQ is the entry for Iraq in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

The Iso Rivolta is a grand tourer introduced in 1962 by Italian automobile manufacturer Iso Automotoveicoli S.p.A. Company chairman Renzo Rivolta and...

ISO/IEC 5230 (known as OpenChain) is an international standard on the key requirements for a high-quality open source license compliance program. The...

Ariko Iso (磯 有理子, Iso Ariko) (born December 7, 1970, in Tokyo, Japan) is the associate athletic trainer for football for the University of Colorado Buffaloes...

ISO 3166-2:AM is the entry for Armenia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:KW is the entry for Kuwait in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

Technology Association (OSTA) on the use of their implementation of the ISO-13346 file system (known as Universal Disk Format) for use on the new DVDs...

independent system operator (ISO) is similarly an organization formed at the recommendation of FERC. In the areas where an ISO is established, it coordinates...

2020. "ISO 22301:2019". ISO. "Iso/Ts 22317:2021". "Iso/Ts 22318:2021". "ISO/TS 22330:2018". ISO. 12 July 2019. "ISO/TS 22331:2018". ISO. "Iso/Ts 22332:2021"...

2,2,4-Trimethylpentane, also known as isooctane or iso-octane, is an organic compound with the formula (CH3)3CCH2CH(CH3)2. It is one of several isomers...

side of the flange. ISO-F (or ISO LFB) flanges have holes for attaching the two flanges with bolts. Two tubes with ISO-K and ISO-F flanges can be joined...

radius. Aerospace metric threads (MJ) – ISO 5855 Tyre valve threads (V) – ISO 4570 Metal bone screws (HA, HB) – ISO 5835 Panzergewinde (Pg) (German) is an...

the regulations of the ISO/IEC 33xxx family (process assessment), e.g., ISO/IEC 33001, ISO/IEC 33002, ISO/IEC 33004, and ISO/IEC 33020. The name Automotive...

The ISO 3533 standard defines the safety requirements for sex toys. The standard stems from efforts from the Swedish standards agency SIS to introduce...

added to ISO 639-3 in 2020, after splitting it and Gerai from Semandang. Beginci at Ethnologue (24th ed., 2021) Lyons, Melinda (May 15, 2020). "ISO 639-3...

for structured and object-oriented programming. The current standard is ISO/IEC 1989:2023. COBOL statements have prose syntax such as MOVE x TO y, which...

Alpha acids may be isomerized to form iso-alpha acids by the application of heat in solution. Iso-alpha acids (iso-α-acids) are typically produced in beer...

ISO-IR-169 is a character set developed by the Blissymbolics Communication International Institute (BCI), and registered with the ISO-IR registry for...

2024-12-30. "ISO/IEC 15408-3:2022". ISO. Retrieved 2024-12-30. "ISO/IEC 15408-4:2022". ISO. Retrieved 2024-12-30. "ISO/IEC 15408-5:2022". ISO. Retrieved...

ISO and DSIT codes: Myanmar uses MYA, China CHN, and Cambodia KH (ISO codes), Thailand uses T (DSIT code), Laos LAO, and Vietnam VN (coincident ISO and...

Group adopted the ISO 45001. Organizations that are certified to OHSAS 18001 were able to migrate to integrated management system or ISO 45001 by March 2021...

developed by ISO technical committee ISO/TC 251. ISO 55001 was published for the first time in January 2014. The ISO 55001:2014 adopts the "ISO High Level...

ISO 3166-2:SO is the entry for Somalia in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization (ISO)...

ISO 3166-2:LU is the entry for Luxembourg in ISO 3166-2, part of the ISO 3166 standard published by the International Organization for Standardization...

ISO/IEC JTC 1, entitled "Information technology", is a joint technical committee (JTC) of the International Organization for Standardization (ISO) and...