FS Class E.380

Class E.380
Type and origin
Power typeelectric
BuilderGanz
Build date1905
Total produced4
Specifications
Configuration:
 • AAR1-C-1
 • UIC1′C1′
Gauge1,435 mm (4 ft 8+12 in) standard gauge
Loco weight64.6 t (63.6 long tons; 71.2 short tons)
Electric system/sThree-phase 3.6 kV 16.7 Hz Catenary
Current pickupBow collector
Performance figures
Maximum speed71.2 km/h (44.2 mph)
Power output1,250 kW (1,680 hp)
Career
OperatorsFS
First run1906
Retiredunknown

The FS Class E.380 was a small class of three-phase electric locomotive used in Italy, introduced in the 1900s.

Overview

The locomotives, which entered in service in a small batch of 4 units, were characterized by a central cabin with two large hoods at each end. Built by Ganz, they had a similar mechanical equipment to the E.360 type. The E.380s showed a series of problems, so that two were refurbished as E.390.

Technical details

The two fixed speeds were obtained by changing the motor connections. For high speed the motors were connected in parallel. For low speed the two motors were "cascaded" by connecting the rotor of one motor to the stator of the other. This caused both motors to run at half speed.[1]

Withdrawal

The low power output at the highest speed, and the limitation of use to only two fixed speeds (due to the control arrangement of the three-phase motors) led both classes to be retired after a short service period.

References

  1. ^ Adorno, Silvia (September 2010). "Il motore trifase asincrono, dalle E.330 alle E.471" (in Italian).

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.