Clock port

The clock port is a commonly used term for the real-time clock interface of the Amiga 1200 computer. The port is a remnant of an abandoned design feature for addition of internal RAM and a clock for time keeping. However, it was later widely used as a general purpose expansion port by third-party developers for devices, such as, I/O cards, sound cards[1] and even a USB controller.[2] Although a real-time clock can be connected to the port, the clock was typically added by other means (usually integrated on CPU or RAM expansions) which leave the clock port free.[3]

The A1200 was the only Amiga model to have this unique 22-pin connector (some revisions of the A1200 motherboard have additional non-functional pins). However, as the address and data signals used by the interface are available through the internal expansion connectors of other Amiga models, clock port adaptors were later created by third-party developers for these systems. This enables owners of other popular models, such as the Amiga 500 or Amiga 600, to use the hardware created for this interface.[4] Due to the popularity of clock port devices, developers even included one or more compatible clock port interfaces on Amiga Zorro boards to allow hosting such devices on these systems.[5][6]

Essentially, the connector provides an 8-bit data interface with limited addressing.[3]

Host hardware

  • A600 1MB Expansion
  • Real Time Clock Module
  • 4-way Clockport Expander
  • Amiga 1200 built-in (address $d80001)
  • Zorro IV boards (also addresses $d84001, $d88001 and $d8c001)
  • Clock port adapter for Amiga 500/1000
  • Third party Zorro bus
    • Buddha flash
    • VarIO
    • DENEB
    • HIGHWAY
    • ISDN-Surfer
    • X-Surf, X-Surf II
    • Unity
    • A603 (1×), A604 ($d80001 and $d90001)
  • Third party C64 expansion port
    • Retro Replay ($de0x or $df2x)
    • MMC64
    • MMC Replay
    • IDE64 (address $de0x)
    • Turbo Chameleon 64

References

  1. ^ Delfina Installation manual (PDF), individual Computers Jens Schönfeld GmbH, 2003, archived from the original (PDF) on 23 May 2014
  2. ^ Subway USB Controller for Amiga (PDF), E3B, 2002
  3. ^ a b Stedman, Ian (13 December 2003). "A1200 Clock Port Info". Retrieved 12 September 2011.
  4. ^ A604 chipmem expansion manual (PDF), individual Computers Jens Schönfeld GmbH, archived from the original (PDF) on 23 May 2014, retrieved 5 October 2011
  5. ^ "Buddha IDE-Controller for all Amigas with Zorro-slots". individual Computers Jens Schönfeld GmbH. Archived from the original on 10 August 2011. Retrieved 9 October 2011.
  6. ^ X-Surf 3cc installation (PDF), individual Computers Jens Schönfeld GmbH, archived from the original (PDF) on 23 May 2014, retrieved 9 October 2011

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.